What is an HDRI dome?

  • An HDRI dome is a 360 degree HDR panorama that the camera sees as the environment, not only a light source.
  • With ground projection the lower half of the panorama is mapped onto a flat ground, so a car or product stands on the photographed surface.
  • V-Ray calls this Finite dome on the Dome Light; Unreal Engine uses the HDRI Backdrop actor.
  • HDRI Hub sells 33 HDRI domes from $5 to $79: 15 aerial domes above the clouds and 18 ground-level locations, up to 16384 pixels wide.
  • A backplate is a normal photo for the camera view. It has more pixels in the frame than a dome but cannot light the scene.

An HDRI dome is a 360 degree high dynamic range panorama that you use as the whole visible environment of a render: it lights the object, shows up in reflections and is the background the camera sees. Most renderers can also project the lower half of the panorama onto a flat ground, so the object stands on the photographed floor instead of floating in front of it. The word comes from the dome light, the light type that carries the image. This page explains how a dome differs from an HDRI sky and from a backplate, and how to set up ground projection in V-Ray and Unreal Engine.

Dome, sky and backplate compared

HDRI domeHDRI skyBackplate
What it is360 degree HDR panorama of a whole location360 degree HDR panorama where the sky matters and the ground does notNormal photo taken through a lens
Lights the sceneYesYesNo
Seen by the cameraYes, as environment and groundUsually only the sky part, or not at allYes, as the background
GroundFrom the panorama, by projectionModeled in 3DIn the photo; shadows need a catcher plane
Camera freedomLimited: near the projection centreFreeOne fixed view per photo
Sharpness in the frameA crop of the panoramaA crop of the panoramaFull photo resolution
Typical useCar or product on location, aircraft in the airArchitecture with a modeled sitePrint-size hero shots

The file type is the same for dome and sky: an equirectangular .exr or .hdr. What differs is the subject and the way you use it. A sky is chosen for its light. A dome is chosen for the place.

How ground projection works

Without projection the panorama sits infinitely far away. The ground in the image never gets closer when the camera moves, and an object placed in the scene seems to float.

Ground projection maps the lower half of the panorama onto a plane under the object. The renderer needs one number for this: the height above ground at which the panorama was shot. With the right height the photographed ground has the right scale, the object can cast contact shadows on it, and a small camera move shows parallax between ground and horizon.

The limits follow from the method:

  • The ground must be flat. Kerbs, walls and parked cars in the panorama are flattened onto the plane and stretch when the camera leaves the centre.
  • The camera has to stay within a few metres of the point where the panorama was shot.
  • The ground under the tripod is the least sharp part of any panorama. Keep the object's footprint small in the frame, or put a matching backplate behind it.

Setup in V-Ray

  1. Create a Dome Light and load the .exr or .hdr as its texture, mapped spherically.
  2. Turn on Finite dome. The dome now has a ground plane, an upper hemisphere and a transition between them.
  3. Set Radius to the size of the location, for example the distance to the nearest buildings.
  4. Set Proj height to the height the panorama was shot from. If you do not know it, start at tripod height and change it until a known object on the ground, such as a road marking, has the right size.
  5. Use Ground blend to control the transition: 0 gives a sharp edge between ground and dome, 1 morphs the shape toward a sphere.

Setup in Unreal Engine

  1. Enable the HDRIBackdrop plugin under Edit > Plugins, in the Rendering category, and restart the project.
  2. Place an HDRI Backdrop actor and assign the imported HDR image as Cubemap.
  3. Set Size, the diameter in metres of the mesh the image is projected onto.
  4. Move Projection Center to the point the image is projected from; its height above the ground does the same job as the projection height in V-Ray.
  5. Adjust Lighting Distance Factor to set how much ground around the camera receives scene lighting and shadows.

Other renderers have the same function under other names. Look for "ground projection" or "dome mode" in the settings of the environment or dome light.

Domes without a ground

The Above the Clouds domes are shot from the air. There is no ground to project: the cloud layer below and the sky above surround an aircraft the way they would in flight. Load them as a normal dome light without ground projection. Most of them come with a zDepth file for compositing.

The HDRI domes on HDRI Hub

The HDRI domes category holds 33 domes:

  • 15 Above the Clouds domes: 4096 pixels for $9, 8192 pixels for $25, and 16384 pixels for $49 on two of them. All 15 cost $99 as a bundle.
  • 12 ground-level locations, named by location number: 8192 pixels for $19 to $29 (one is 4096 pixels for $15), and on four of them a large version of 14000 to 16260 pixels for $79. Small 2048 pixel versions cost $5 to $9.
  • 6 older domes, HDR 044 to HDR 049 (silos and an old freight yard), at 10240 pixels for $19.

When the shot needs more pixels in the frame than a dome crop can give, use a backplate set: photos for the camera and the HDRI of the same place for light. How to match an HDRI and a backplate has the steps.

Frequently asked questions

What is the difference between an HDRI dome and an HDRI sky?

Both are 360 degree HDR panoramas. A dome is used as the visible location including its ground; a sky is used mainly for light and for the sky behind a modeled scene.

What is a dome light?

A light type that surrounds the scene with a sphere or hemisphere and emits the colours of an image. Loading an HDRI into it gives image-based lighting.

Do I need ground projection?

Only when the object should stand on the photographed ground. For lighting alone, and for aerial domes, leave it off.

Which projection height should I set?

The height of the camera when the panorama was shot. If it is unknown, start at tripod height and adjust until objects on the ground have a believable size.

Can I use an HDRI dome instead of a backplate?

For wide shots and real-time work, yes. For print-size or long-lens shots a backplate is sharper, because the frame shows only a small crop of the panorama. See the HDRI resolution guide.